Nikwax Rug Proof - Liter

Nikwax® Rug Proof™, the safe, high performance wash in waterproofing for all animal rugs and coats. Adds Durable Water Repellency and revitalizes breathability and insulation of your animal's rugs and coats (sheets and blankets).

Nikwax Rug Proof adds Durable Water Repellency (DWR) while maintaining breathability. It is quick and easy to apply in the washing machine, and its DWR develops on air drying. Nikwax Rug Proof™ has been specifically designed and optimized for breathable waterproof animal rugs and coats. It leaves a flexible water repellent treatment on individual fibers allowing moisture vapor to pass through, maintaining breathability, while protecting your animal from getting wet in the rain. Finally, washing machine application ensures that the treatment goes right through the rug or coat, treating seams, tapes and cords, as well as the fabric.

Apply Nikwax Rug Wash™ in the washing machine -

For best results always clean rug first with Nikwax® Rug Wash™. No need to dry item(s) before waterproofing. It is vital that rugs are washed and rinsed thoroughly. Shake well before use. Follow care label instructions.

Front Loading Machine Wash:

•Remove all detergent build-up from the detergent dispenser.
•Place clean rug in washing machine*.
•Use 17fl oz (500ml) for 1 rug. Treat 1 rug per load.
•Run 30°C cotton cycle.

Air dry or tumble dry on a low setting if care label allows.

* For large items its recommended using a commercial laundry mat/ washing machine.

Applying Nikwax Rug Wash™ by hand -
•Wear gloves. Use 17fl oz (500ml) for 1 rug, with 10 liters (10.5 quarts) of hand-hot water in vessel. •Agitate to mix, push down into vessel so that whole rug is immersed.
•Add a further 15 liters (16 quarts) of warm water to cover rug and agitate.
•Leave to soak for 2 hours, agitating occasionally.
•Rinse in cold water until water runs clear.

Air dry or tumble dry on a low setting if care label allows.

Application by Sponging on:
•Wear gloves. Spread clean rug on clean area and wet thoroughly with a hose.
•Use 17fl oz (500 ml) for 1 rug, with 1.5 liters (3 pints) of hand-hot water.
•Using a new sponge apply solution to rug, working into fabric and seams.
•Use any surplus on back area of rug, leave for 5-10 minutes.
•Rinse in cold water until water runs clear.

Air dry or tumble dry on a low setting if care label allows.